I Have A Super USB Drive

The 21st century is the century of electronic information, and the development of electronic information depends entirely on the development of IC chips.

The IC chip is to interconnect the transistors, resistors, capacitors, inductors and other components and wiring required in a circuit, and make them on a small or several small semiconductor chips. The smaller these things are, the more they can be integrated. The more arranged, the faster the calculation speed.

Therefore, the development of IC chips is essentially the development of continuous miniaturization of integrated circuits.

The so-called lithography machine is the key machine for manufacturing computer chips. It uses light sources of various wavelengths to lithography the chips to manufacture the chips.

The lithography machines are also divided into various levels. Today, Zhongzhou District only masters the 16-nanometer lithography technology, while the world's most advanced lithography machines can reach 5 nanometers.

And this lithography machine is EUV lithography machine.

As we all know, the visible light of the human naked eye only accounts for an extremely small part of the light source in the universe, which is the so-called "red orange yellow green blue indigo violet".

Above red light, there are ultra-long waves such as infrared rays, microwaves, and radio waves, and under purple light, there are also ultra-short waves such as ultraviolet rays, X-rays, and gamma rays.

Extreme ultraviolet light is a section of invisible light that is lower than violet light but higher than X-rays, with a minimum wavelength of 13.5 nanometers, and can manufacture chips with single-digit nanometer-scale processes.

And this kind of EUV lithography machine, there is only one manufacturer in the world that can manufacture it, and that is ASML in the Netherlands.

However, the reason for achieving this achievement is not the result of a single company, but the result of the cooperation of more than ten countries in the world. The lenses and light sources are all from European countries, and the optical components and control chips inside are all from North America.

Therefore, it can be said that ASML is the supreme product of the entire Western civilization.

Zhongzhou District had signed a contract with this company before, and planned to complete the delivery of EUV lithography machines by the end of 2019. However, due to obstruction in North America, ASML has not delivered until now.

Therefore, Chen Chen's desire to obtain an EUV lithography machine by conventional means is tantamount to wishful thinking.

However, even if unconventional methods are used, Chen Chen has no choice. After all, an EUV lithography machine weighs 180 tons, consists of 120,000 parts, requires 40 containers, and three large cargo planes to transport it. Installation and commissioning alone It takes more than a year.

Therefore, without the cooperation of the other party, Chen Chen would have no way to snatch it even if he wanted to.

No wonder the Central Continent District was helpless.

And the reason why Chen Chen wanted to get the EUV lithography machine was to study the T-800 chip. The researchers recruited by the Heiguang Industrial Zone are currently researching the T-800, and the chip has been analyzed. It is manufactured by EUV lithography technology, and the precision of nanotechnology has reached an astonishing 1 nanometer.

This is almost at the limit of silicon semiconductors.

To achieve this kind of process precision, artificial AI is also very important. Obviously, the level of 1 nanometer is achieved by the ability of Skynet.

And Chen Chen had little X on his side, so he could reach the same level.

That's why Chen Chen had the idea of ​​getting an EUV lithography machine.

But now it seems that this idea needs to be considered in the long run.

At this time, Cheng Chao parked his vehicle outside the machinery processing factory, and several researchers had been waiting at the door for a long time. Seeing Chen Chen's arrival, he immediately went up to greet him.

"Mr. Chen, hello."

"Professor Charles, you are safe.

"

The two shook hands and walked towards the factory together.

"Mr. Chen, according to your request, we have produced corresponding weapons."

The two said as they walked, "It's just that the energy source is missing. After the energy source is available, the weapon can be tested."

"It's okay, just leave it to me for the test shooting."

Chen Chen nodded, and then several people came to the inside of the factory. On one of the tables, there were three weapons with strange shapes.

The first one looks like a portable pistol weapon, which is similar to a normal pistol, except that it is not painted, so it looks dark and not slippery.

"The gun body is made of carbon fiber, because the weight of carbon fiber is much lighter than that of steel, so the gun body made of carbon fiber can reduce a lot of weight."

Professor Charles explained, "In addition, we use the latest high-alloy chromium-molybdenum steel for the barrel. Its alloy components include: chromium, molybdenum, carbon, silicon, manganese, nickel, vanadium and sulfur. The tensile strength reaches 12,000 kgf/cm2, high strength, high temperature resistance, and high pressure resistance, which should meet your requirements."

Chen Chen nodded, picked up the pistol, and stroked it lightly.

The pistol felt cold and hard to the touch. Because it was designed by Chen Chen himself, he knew the structure of the pistol very well. He lightly pressed the button on the left side of the pistol, and the magazine immediately popped out from the grip.

In the magazine, the bullets were not conventional bullets, but oval bullets that were only two centimeters long and half a centimeter in diameter like rice grains.

"Because of the special power you mentioned, the cartridge case and gunpowder device are omitted, and the warhead can be loaded directly, so we designed the magazine as a super-capacity magazine that can hold fifty bullets."

Professor Charles continued to explain, "As for the bullet, the exterior is armored with a layer of nickel-plated steel with a thickness of 1.5mm, while the core of the bullet is made of lead core to form a greater lethality."

Having said so much, Chen Chen also understands why the other party has been by his side, but Chen Chen can only let him down, "Professor Charles, thank you for everything, after I test the gun, I will put the gun in the Use data sent to you."

With that said, Chen Chen patted him on the shoulder, told Cheng Chao to pick up the other two weapons, then turned and left.

Sure enough, after Chen Chen left, Professor Charles couldn't help showing a hint of disappointment. After getting the blueprints, he could immediately deduce that the reason why these three weapons were designed in this way was because of a special power source.

And that kind of power source can continuously release energy with the impact, replacing the gunpowder of the bullet case, and launching the bullet.

And according to the requirements provided by Chen Chen, that special power source was even more explosive than gunpowder.

It's just that Charles and other manufacturers have already thought about it, and they haven't thought about what kind of substance can become the power source of this firearm.

If this kind of power source really exists, it has unlimited potential, and it can even trigger a revolution in energy weapons and create a brand new industrial system.

Although the existence of this kind of power source is outrageous, and even almost broke the thermodynamic formula, no one thought Chen Chen was crazy, because when Blacklight Technology showed the wreckage of the T-800 in front of them, their world view had already been broken .

It's a pity that until the end, Chen Chen didn't let them see what that power source was...